In the outback country of the West,
working cowboys still follow rules of etiquette that have been
handed down through generations. How do you know these rules
if you havenít been exposed to cowboy culture? Mary Flitner
of Diamond Trail Ranch in Greybull, Wyoming, sums it up best,
ďBe quiet and humble. Your cowboy skills (if you have any) will
show in due time and you need not try to show them.Ē Letís discuss
a few of these codes and explain their purposes.
Code #1: Never touch another personís horse or tack.
Cowboys donít touch or handle another manís mount. Some ranch
horses are hard to handle and the riders donít want their animals
disturbed by someone else. This policy also holds true
when saddling and unsaddling a horse and loading or unloading
a horse from the trailer.
Saddles and tack are highly valued personal items that should
be handled only by their owners. Sometimes the tack has repairs
or riggings that must be handled in a special way. A cowboy
makes his living in his saddle and an equipment failure can
cause injury to him or his animal.
Cowboy Code #2: Be ready and on time to work.
Gather all your gear beforehand, and donít expect to borrow
anything. Definitely donít borrow saddles, pads, spurs, or other
gear unless you ask. If youíre uncertain if some of your gear
is appropriate, ask the ranch owner or manager especially if
youíre riding a ranchís horse. Also ask which bit and headstall
works best on a borrowed horse.
Code #3: Donít bring your dogs unless you ask permission.
Untrained, nonworking dogs can disturb cattle. If youíre trailing
a herd of cow-calf pairs, the cows will fight your dog to protect
their calves. Cow dogs are helpful if their owners handle them
correctly. However, most dogs canít be handled when they charge
into a herd of cattle.
Cowboy Code #4: Never ride ahead of the cow boss.
The cow boss is in charge of a crew of cowboys on a ranch. He
cuts (chooses) a string or number of horses for each
cowboy. Each day he or his jigger (second in command)
ropes the horses for each cowboy when the cowboy names his mount
for the day. The cow boss decides what the cowboys will do for
the day and cuts a circle for each person in a gather.
Cowboy Code #5: Donít turn your horseís tail to a cow.
Itís hard to work cattle when your horse is turned away from
them. You canít see to read or control what the cattle will
Code #6: Donít ride in front of someone else.
Instead, ask permission to cross in front of another rider and
say, ďExcuse me.Ē Doing so helps avoid riding too closely to
another horse, thus risk getting kicked or having your horse
kick the other horse. Also, you might interfere with the riderís
vision or tack. Plus itís not polite.
Cowboy Code #7:
Wait for a dismounted person at the gate. The rider who
dismounts to open a gate should also close the gate after all
riders have passed through the opening. Once the person closes
the gate, he must remount his horse. If the other riders take
off, his horse will try to follow the other horses, making it
difficult for the rider to remount.
Code #8: Work cattle at a walk.
Contrary to what you might see in movies, cowboys donít gallop
their horses all the time. The long trot is actually the preferred
gait to cover country, while the walk is the best pace to move
cattle. The reason is simple, cattle lose weight when they run,
and weight is worth money when the cattle are sold. Plus, cattle
and some horses become excited and hard to handle when they
Cowboy Code #9: Help with the cut or ride into the herd only
Holding the herd for the cut is an important job. A cut is made
in a herd to separate certain cattle, such as strays, heifers,
steers, dry cows, bulls, etc. Allow the person in charge of
making the cut to do his job without interference.
Cowboy Code #10: Take your rope down only when asked.
An animal is roped for specific reasons. Some livestock owners
donít want their animals roped unless they tell you to do so.
Cowboy Code #11: Ride up on your rope in the branding corral.
After you rope a calf in the branding corral, ride up on your
rope and dally. In other words, ride toward the calf and take
the slack out of the rope. That way, the calf wonít be on too
long a rope, making it hard to handle, and itíll be restrained
enough to prevent knocking over the branding pot, medicine box
and ranch hands on the ground.
Cowboy Code #12: Donít brand another manís cattle.
Today, at a branding, the owner of the cattle brands the stock,
or he designates a trustworthy person to do the work. This rule
also applies to castrating, ear marking and vaccinating. This
rule was started back when dishonest hands used their irons
on calves that didnít belong to them. Donít pick up a branding
iron and try to help unless youíre asked. Several different
irons might be in the fire and you might not know which iron
goes on what animal.
Article by Mike Laughlin
Photos by Lee Raine
A version of this article
appeared in the March 2004 issue of Western Horseman